Matshita UJ-841S - problém s vypalováním
Ahoj,
při pokusu vypálit DVD Verbatim, na které vypaluji vždy, proces zkončí neúspěchem. Program nero mi oznámí: "nemohu obnovit TOC Nemohu začít disk najednou DAO". Nevíte, v čem by mohl být problém?
při pokusu vypálit DVD Verbatim, na které vypaluji vždy, proces zkončí neúspěchem. Program nero mi oznámí: "nemohu obnovit TOC Nemohu začít disk najednou DAO". Nevíte, v čem by mohl být problém?
Stáhl jsem teď nejnovější verzi nera 6 a chybová hláška je malinko jiná: Unable to recover TOC, Could not perform start Disc-at-once,
Tak zkus režim TAO, pokud chceš na DVD dopalovat nějaký věci, nemůžeš použít DAO režim. V DAO režimu je TOC tabulka zapsána hned na začátku disku, protože už dopředu je známá celá struktura disku. U TAO režimu je naopak zapsána až na konci každé session, hlavní TOC tabulka je pak na konci CD.
Zkusil jsem ještě demo nera 7, ale výsledek je úplně stejný. DAO mi změnit na TAO nejde, volba track-at-once je zašedlá.
Tak teď se mi podařilo vypálit jedno DVD, které včera vypálit nešlo. Vypaloval jsem ho jako jednosekvenční disk. Teď už žádný další vypálit nelze, moc tomu nerozumim. Chtěl jsem flashnout firmware, ale nesehnal jsem ani neoficiální, natož ten oficiální. Kdyby jste někdo věděl, kde ho dohledat k notebooku od asusu, tak dejte vědět. Dík
http://drivers.softpedia.com/get/FIRMWARE/Others/Matsushita-UJ-841S-111.shtml
http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1311
http://www.softwaredriverdownload.com/matshita_dvd_ram_uj-841s_update.html
Zkus tyhle tři linky, tvářili se že tam ten firmware je. Měl by pomoct, pokud ne, tak reklamuj notebook
http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1311
http://www.softwaredriverdownload.com/matshita_dvd_ram_uj-841s_update.html
Zkus tyhle tři linky, tvářili se že tam ten firmware je. Měl by pomoct, pokud ne, tak reklamuj notebook
Ještě vložím log
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder:Version: 1.00 - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM:Version: 1.00 - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS421210H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-841S atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-841S G: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572144kB)
Free physical memory: 905MB (927468kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2008
ISO kompilace
12:53:49 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:53:49 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:53:49 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
12:53:49 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
12:53:49 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2140511 (475:40.11, 4180MB)
12:53:49 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
12:53:49 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: MATSHITA DVD-RAM UJ-841S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:53:49 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:53:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2140512 (2140512) = #2140512/475:40.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140512 blocks [G: MATSHITA DVD-RAM UJ-841S]
--------------------------------------------------------------
12:53:51 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: MATSHITA DVD-RAM UJ-841S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4383768576, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2140512 | 0 | 0x00
2140512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:53:51 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
12:53:51 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
12:53:51 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
12:53:51 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
12:53:51 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
12:53:51 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11 080 kB/s)
12:53:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:53:51 #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
12:53:51 #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
12:53:51 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06262500: Len x648
12:53:51 #21 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:53:51 #22 SPTI -1122 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 20 A9 60 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A F8 00 00 00 57
12:53:51 #23 CDR -1122 File ThreadedTransferInterface.cpp, Line 1752
Unable to recover TOC
G: MATSHITA DVD-RAM UJ-841S
12:53:51 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
12:53:51 #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
12:53:51 #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11 080 kB/s)
12:53:51 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:53:52 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
12:53:52 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder:
Adapter driver:
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM:
Adapter driver:
=== Scsi-Device-Map ===
DiskPeripheral : HTS421210H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-841S atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-841S G: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572144kB)
Free physical memory: 905MB (927468kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2008
ISO kompilace
12:53:49 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:53:49 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:53:49 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
12:53:49 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
12:53:49 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2140511 (475:40.11, 4180MB)
12:53:49 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
12:53:49 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: MATSHITA DVD-RAM UJ-841S, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:53:49 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:53:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2140512 (2140512) = #2140512/475:40.12
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140512 blocks [G: MATSHITA DVD-RAM UJ-841S]
--------------------------------------------------------------
12:53:51 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: MATSHITA DVD-RAM UJ-841S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4383768576, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2140512 | 0 | 0x00
2140512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:53:51 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
12:53:51 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
12:53:51 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
12:53:51 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
12:53:51 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
12:53:51 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11 080 kB/s)
12:53:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:53:51 #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
12:53:51 #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
12:53:51 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06262500: Len x648
12:53:51 #21 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate:
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:53:51 #22 SPTI -1122 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 20 A9 60 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A F8 00 00 00 57
12:53:51 #23 CDR -1122 File ThreadedTransferInterface.cpp, Line 1752
Unable to recover TOC
G: MATSHITA DVD-RAM UJ-841S
12:53:51 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
12:53:51 #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
12:53:51 #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11 080 kB/s)
12:53:51 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:53:52 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
12:53:52 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
